DKGB-12250-12V250AH SEALED MAINTANANCE FREE GEL BATTERY SOLAR BATTERY

Short Description:

Rated Voltage: 12v
Rated Capacity: 250 Ah (10 hr, 1.80 V/cell, 25 ℃)
Approximate Weight(Kg, ±3%): 64.1kg
Terminal: Copper
Case: ABS


Product Detail

Product Tags

Technical Features

1. Charging efficiency: The usage of imported low resistance raw materials and advanced process help make theinternal resistance smaller and the acceptance ability of small current charging stronger.
2. High and low temperature tolerance: Wide temperature range (lead-acid:-25-50 ℃, and gel:-35-60 ℃), suitablefor indoor and outdoor use in varies environments.
3. Long cycle-life: The design life of lead acid and gel series reach to more than 15 and 18 years respectively, forthe arid is corrosion- resistant. And electrolvte is without risk of stratification by using multiple rare-earth alloy ofindependent intellectual property rights, nanoscale fumed silica imported from Germany as base materials, andelectrolyte of nanometer colloid all by independent research and development.
4. Environment-friendly: Cadmium (Cd), which is poisonous and not easy to recycle, does not exist. Acid leakageof gel electrolvte will not happen. The battery operates in safety and environmental protection.
5. Recovery performance: The adoption of special alloys and lead paste formulations make a low self-dischargerate, good deep discharge tolerance, and strong recover capability.

Round White podium pedestal product display stand background 3d rendering
Round White podium pedestal product display stand background 3d rendering
Round White podium pedestal product display stand background 3d rendering

Parameter

Model

Voltage

Actual capacity

N.W.

L*W*H*Total hight

DKGB-1240

12v

40ah

11.5kg

195*164*173mm

DKGB-1250

12v

50ah

14.5kg

227*137*204mm

DKGB-1260

12v

60ah

18.5kg

326*171*167mm

DKGB-1265

12v

65ah

19kg

326*171*167mm

DKGB-1270

12v

70ah

22.5kg

330*171*215mm

DKGB-1280

12v

80ah

24.5kg

330*171*215mm

DKGB-1290

12v

90ah

28.5kg

405*173*231mm

DKGB-12100

12v

100ah

30kg

405*173*231mm

DKGB-12120

12v

120ah

32kgkg

405*173*231mm

DKGB-12150

12v

150ah

40.1kg

482*171*240mm

DKGB-12200

12v

200ah

55.5kg

525*240*219mm

DKGB-12250

12v

250ah

64.1kg

525*268*220mm

DKGB1265-12V65AH GEL BATTERY1

production process

Lead ingot raw materials

Lead ingot raw materials

Polar plate process

Electrode welding

Assemble process

Sealing process

Filling process

Charging process

Storage and shipping

Certifications

dpress

More for reading

The difference between lead-acid battery and gel battery
Is it better to choose lead-acid battery or gel battery for solar cell? What's the difference?
First of all, these two kinds of batteries are energy storage batteries, which are suitable for solar power generation equipment. The specific choice depends on your environment and requirements.

Lead acid battery and gel battery both use the cathode absorption principle to seal the battery. When Xili battery is charged, the positive pole will release oxygen and the negative pole will release hydrogen. Oxygen evolution from the positive electrode starts when the positive electrode charge reaches 70%. The oxygen precipitated reaches the cathode and reacts with the cathode as follows to achieve the purpose of cathode absorption. The hydrogen evolution of the negative electrode starts when the charge reaches 90%. In addition, the reduction of oxygen on the negative electrode and the improvement of the hydrogen overpotential of the negative electrode itself prevent a large amount of hydrogen evolution reaction.

The big difference between the two is electrolyte curing.

For lead-acid batteries, although most of the electrolyte of the battery is kept in the AGM membrane, 10% of the membrane pores must not enter the electrolyte. The oxygen generated by the positive electrode reaches the negative electrode through these pores and is absorbed by the negative electrode.

For gel battery, the silicon gel in the battery is a three-dimensional porous network structure composed of SiO particles as the skeleton, which encapsulates the electrolyte inside. After the silica sol filled by the battery turns into gel, the framework will further shrink, so that cracks in the gel will appear between the positive and negative plates, providing a channel for the oxygen released from the positive electrode to reach the negative electrode.

It can be seen that the sealing principle of the two batteries is the same, and the difference lies in the way of "fixing" electrolyte and the way of providing oxygen to reach the negative electrode channel.

Moreover, there are also great differences between the two types of batteries in structure and technology. Lead acid batteries use pure sulfuric acid solution as electrolyte. The electrolyte of colloidal sealed lead acid batteries is composed of silica sol and sulfuric acid. The concentration of sulfuric acid solution is lower than that of lead acid batteries.

After that, the discharge capacity of Xili battery is also different. Colloid electrolyte formula, control the size of colloidal particles, add hydrophilic polymer additives, reduce the concentration of colloidal solution, improve the permeability and affinity to the electrode plate, adopt vacuum filling process, replace the rubber separator with composite separator or AGM separator, and improve the liquid absorption of the battery; The discharge capacity of the gel sealed battery can reach or approach the level of the open lead battery by eliminating the sedimentation tank of the battery and moderately increasing the content of active substances in the plate area.

AGM sealed lead acid batteries have less electrolyte, thicker plates, and lower utilization rate of active substances than open type batteries, so the discharge capacity of Xili batteries is about 10% lower than that of open type batteries. Compared with today's gel sealed battery, its discharge capacity is smaller. That is to say, the price of gel battery will be relatively high.


  • Previous:
  • Next:

  • Related Products